18.26.020 Information to be shown—Form.
The parcel map shall conform to all of the provisions of the Subdivision Map Act, shall be prepared by, or under the direction of, a registered civil engineer or licensed land surveyor, shall show the location of streets and property lines bounding the property, and shall conform to all of the following provisions:
A. It shall be legibly drawn, printed or reproduced by a process guaranteeing a permanent record in black on tracing cloth or polyester-base film. Certificates or statements, affidavits, and acknowledgments may be legibly stamped or printed upon the map with opaque ink. If ink is used on polyester-base film, the ink surface shall be coated with a suitable substance to assure permanent legibility;
B. The size of each sheet shall be eighteen by twenty-six inches. A marginal line shall be drawn completely around each sheet, leaving an entirely blank margin of one inch. The scale of the map shall be large enough to show all details clearly and enough sheets shall be used to accomplish this end. The particular number of the sheet and the total number of sheets comprising the map shall be stated on each of the sheets, and its relation to each adjoining sheet shall be clearly shown;
C. Each parcel shall be numbered and each block may be numbered or lettered. Each street shall be named or otherwise designated;
D.
1. The exterior boundary of the land included within the subdivision shall be indicated by distinctive symbols and clearly so designated.
2. The map shall show the location of each parcel and its relation to surrounding surveys. (Ord. 89-2 § 2, 1989.)